Tag Archives: exim

Asynchronous Email: Exim over NNCP (or UUCP)

Following up to yesterday’s article about how NNCP rehabilitates asynchronous communication with modern encryption and onion routing, here is the first of my posts showing how to put it into action.

Email is a natural fit for async; in fact, much of early email was carried by UUCP. It is useful for an airgapped machine to be able to send back messages; errors from cron, results of handling incoming data, disk space alerts, etc. (Of course, this would apply to a non-airgapped machine also).

The NNCP documentation already describes how to do this for Postfix. Here I will show how to do it for Exim.

A quick detour to UUCP land

When you encounter a system such as email that has instructions for doing something via UUCP, that should be an alert to you that “here is some very relevant information for doing this same thing via NNCP.” The syntax is different, but broadly, here’s a table of similar NNCP commands:

Connect to remote system uucico -s, uupoll nncp-call, nncp-caller
Receive connection (pipe, daemon, etc) uucico (-l or similar) nncp-daemon
Request remote execution, stdin piped in uux nncp-exec
Copy file to remote machine uucp nncp-file
Copy file from remote machine uucp nncp-freq
Process received requests uuxqt nncp-toss
Move outbound requests to dir (for USB stick, airgap, etc) N/A nncp-xfer
Create streaming package of outbound requests N/A nncp-bundle

If you used UUCP back in the day, you surely remember bang paths. I will not be using those here. NNCP handles routing itself, rather than making the MTA be aware of the network topology, so this simplifies things considerably.

Sending from Exim to a smarthost

One common use for async email is from a satellite system: one that doesn’t receive mail, or have local mailboxes, but just needs to get email out to the Internet. This is a common situation even for conventionally-connected systems; in Exim speak, this is a “satellite system that routes mail via a smarthost.” That is, every outbound message goes to a specific target, which then is responsible for eventual delivery (over the Internet, LAN, whatever).

This is fairly simple in Exim.

We actually have two choices for how to do this: bsmtp or rmail mode. bsmtp (batch SMTP) is the more modern way, and is essentially a derivative of SMTP that explicitly can be queued asynchronously. Basically it’s a set of SMTP commands that can be saved in a file. The alternative is “rmail” (which is just an alias for sendmail these days), where the data is piped to rmail/sendmail with the recipients given on the command line. Both can work with Exim and NNCP, but because we’re doing shiny new things, we’ll use bsmtp.

These instructions are loosely based on the Using outgoing BSMTP with Exim HOWTO. Some of these may assume Debianness in the configuration, but should be easily enough extrapolated to other configs as well.

First, configure Exim to use satellite mode with minimal DNS lookups (assuming that you may not have working DNS anyhow).

Then, in the Exim primary router section for smarthost (router/200_exim4-config_primary in Debian split configurations), just change transport = remote_smtp_smarthost to transport = nncp.

Now, define the NNCP transport. If you are on Debian, you might name this transports/40_exim4-config_local_nncp:

  debug_print = "T: nncp transport for $local_part@$domain"
  driver = pipe
  user = nncp
  batch_max = 100
  command = /usr/local/nncp/bin/nncp-exec -noprogress -quiet hostname_goes_here rsmtp

This is pretty straightforward. We pipe to nncp-exec, run it as the nncp user. nncp-exec sends it to a target node and runs whatever that node has called rsmtp (the command to receive bsmtp data). When the target node processes the request, it will run the configured command and pipe the data in to it.

More complicated: Routing to various NNCP nodes

Perhaps you would like to be able to send mail directly to various NNCP nodes. There are a lot of ways to do that.

Fundamentally, you will need a setup similar to the UUCP example in Exim’s manualroute manual, which lets you define how to reach various hosts via UUCP/NNCP. Perhaps you have a star topology (every NNCP node exchanges email with a central hub). In the NNCP world, you have two choices of how you do this. You could, at the Exim level, make the central hub the smarthost for all the side nodes, and let it redistribute mail. That would work, but requires decrypting messages at the hub to let Exim process. The other alternative is to configure NNCP to just send to the destinations via the central hub; that takes advantage of onion routing and doesn’t require any Exim processing at the central hub at all.

Receiving mail from NNCP

On the receiving side, first you need to configure NNCP to authorize the execution of a mail program. In the section of your receiving host where you set the permissions for the client, include something like this:

      exec: {
        rsmtp: ["/usr/sbin/sendmail", "-bS"]

The -bS option is what tells Exim to receive BSMTP on stdin.

Now, you need to tell Exim that nncp is a trusted user (able to set From headers arbitrarily). Assuming you are running NNCP as the nncp user, then add MAIN_TRUSTED_USERS = nncp to a file such as /etc/exim4/conf.d/main/01_exim4-config_local-nncp. That’s it!

Some hosts, of course, both send and receive mail via NNCP and will need configurations for both.

Mail Server Comparison

After my mail reader comparison, I’ve been fortunate enough to have a few mail server troubles. So here, to help you with your mail server decisions, is my mail server comparison.

  • Postfix: Your mail can now have the distinction of being deleted by 53 individual subservers
  • Sendmail: Priority treatment if you can write, while holding down your Shift key, an m4 macro to calculate the airspeed velicoty of an unladen swallow. All other messages will be summarily deleted in 6-8 weeks, or whenever the queue daemon catches up, whichever is later
  • Exim: Conveniently marks every message as “unrouteable” to reduce the hassle of making up reasons to bounce mail
  • Courier: Promptly delivers, but then quickly hides, all mail
  • Qmail: Might actually receive mail from DJB. The rest of the world will receive rude, copyrighted bounce messages.
  • Exchange: Storing mail is irrelevant since the server isn’t up often enough to actually receive any. This server is also perfectly secure unless it is running.