Tag Archives: irc

Review: Linux IM Software

I’ve been looking at instant messaging and chat software lately. Briefly stated, I connect to Jabber and IRC networks from at least three different computers. I don’t like having to sign in and out on different machines. One of the nice features about Jabber (XMPP) is that I can have clients signing in from all over the place and it will automatically route messages to the active one. If the clients are smart enough, that is.

Gajim

I have been using Gajim as my primary chat client for some time now. It has a good feature set, but has had a history of being a bit buggy for me. It used to have issues when starting up: sometimes it would try to fire up two copies of itself. It still has a bug when being fired up from a terminal: if you run gajim & exit, it will simply die. You have to wait a few seconds to close the terminal you launched it from. It has also had issues with failing to reconnect properly after a dropped network connection and generating spurious “resource already in use” errors. Upgrades sometimes fix bugs, and sometimes introduce them.

The latest one I’ve been dealing with is its auto-idle support. Sometimes it will fail to recognize that I am back at the machine. Even weirder, sometimes it will set one of my accounts to available status, but not the other.

So much for my complaints about Gajim; it also has some good sides. It has excellent multi-account support. You can have it present your multiple accounts as separate sections in the roster, or you can have them merged. Then, say, all your contacts in a group called Friends will be listed together, regardless of which account you use to contact them.

The Jabber protocol (XMPP) permits you to connect from multiple clients. Each client specifies a numeric priority for its connection. When someone sends you a message, it will be sent to the connection with the highest priority. The obvious feature, then, is to lower your priority when you are away (or auto-away due to being idle), so that you always get IMs at the device you are actively using. Gajim supports this via letting you specify timeouts that get you into different away states, and using the advanced configuration editor, you can also set the priority that each state goes to. So, if Gajim actually recognized your idleness correctly, this would be great.

I do also have AIM and MSN accounts which I use rarely. I run Jabber gateways to each of these on my server, so there is no need for me to use a multiprotocol client. That also is nice because then I can use a simple Jabber client on my phone, laptop, whatever and see all my contacts.

Gajim does not support voice or video calls.

Due to an apparent bug in Facebook, the latest Gajim release won’t connect to Facebook servers, but there is a patch that claims to fix it.

Psi

Psi is another single-protocol Jabber client, and like Gajim, it runs on Linux, Windows, and MacOS. Psi has a nicer GUI than Gajim, and is more stable. It is not quite as featureful, and one huge omission is that it doesn’t support dropping priority on auto-away (though it, weirdly, does support a dropped priority when you manually set yourself away).

Psi doesn’t support account merging, so it always shows my contacts from one account separately from those from another. I like having the option in Gajim.

There is a fork of Psi known variously as psi-dev or psi-plus or Psi+. It adds that missing priority feature and some others. Unfortunately, I’ve had it crash on me several times. Not only that, but the documentation, wiki, bug tracker, everything is available only in Russian. That is not very helpful to me, unfortunately. Psi+ still doesn’t support account merging.

Both branches of Psi support media calling.

Kopete

Kopete is a KDE multiprotocol instant messenger client. I gave it only about 10 minutes of time because it is far from meeting my needs. It doesn’t support adjustable priorities that I can tell. It also doesn’t support XMPP service discovery, which is used to do things like establish links to other chat networks using a Jabber gateway. It also has no way to access ejabberd’s “send message to all online users” feature (which can be accessed via service discovery), which I need in emergencies at work. It does offer multimedia calls, but that’s about it.

Update: A comment pointed out that Kopete can do service discovery, though it is in a very non-obvious place. However, it still can’t adjust priority when auto-away, so I still can’t use it.

Pidgin

Pidgin is a multiprotocol chat client. I have been avoiding it for years, with the legitimate fear that it was “jack of all trades, master of none.” Last I looked at it, it had the same limitations that Kopete does.

But these days, it is more capable. It supports all those XMPP features. It supports priority dropping by default, and with a plugin, you can even configure all the priority levels just like with Gajim. It also has decent, though not excellent, IRC protocol support.

Pidgin supports account merging — and in fact, it doesn’t support any other mode. You can, for instance, tell it that a given person on IRC is the same as a given Jabber ID. That works, but it’s annoying because you have to manually do it on every machine you’re running Pidgin on. Worse, they used to support a view without merged accounts, but don’t anymore, and they think that’s a feature.

Pidgin does still miss some nifty features that Gajim and Psi both have. Both of those clients will not only tell you that someone is away, but if you hover over their name, tell you how long someone has been away. (Gajim says “away since”, while Pidgin shows “last status at”. Same data either way.) Pidgin has the data to show this, but doesn’t. You can manually find it in the system log if you like, but unhelpfully, it’s not on the log for an individual person.

Also, the Jabber protocol supports notifications while in a chat: “The contact is typing”, paying attention to a conversation, or closed the chat window. Psi and Gajim have configurable support for these; you can send whatever notifications your privacy preferences say. Pidgin, alas, removed that option, and again they see this as a feature.

Pidgin, as a result, makes me rather nervous. They keep removing useful features. What will they remove next?

It is difficult to change colors in Pidgin. It follows the Gtk theme, and there is a special plugin that will override some, but not all, Gtk options.

Empathy

Empathy supports neither priority dropping when away nor service discovery, so it’s not usable for me. Its feature set appears sparse in general, although it has a unique desktop sharing option.

Update: this section added in response to a comment.

On IRC

I also use IRC, and have been using Xchat for that for quite some time now. I tried IRC in Pidgin. It has OK IRC support, but not great. It can automatically identify to nickserv, but it is under-documented and doesn’t support multiple IRC servers for a given network.

I’ve started using xchat with the bip IRC proxy, which makes connecting from multiple machines easier.

Another Freenode Annoyance

I regularly keep XChat windows open to both Freenode and OFTC. I prefer OFTC for a variety of reasons, but still participate in several channels on Freenode.

Recently I discovered that somebody else was using my nick. No problem, I think; just use nickserv and claim it back. Only nickserv claims I never registered the nick.

But that can’t be, I thought. I registered it at least 10 YEARS ago. Probably longer, but my logs don’t go back farther than that. I’m on with it almost every day. And I identify to nickserv when I have to — maybe every few months.

And therein lies the problem. Apparently Freenode added a policy at some point of deleting registered nicks that haven’t identified in the last 60 days. Only they never notified people of the new policy (other than perhaps sticking it on an obscure website at some point). And they don’t care if you’re ONLINE, only if you identify to nickserv.

I tried to find staff to ask on Freenode as per the instructions on their website for contacting people for help, but each time I tried, no staff was online.

So I asked in #freenode for help. I was essentially told to leave them alone, and also not to ask the person using the nick for it back. So I’m SOL, and got the distinct impression that they don’t care at all about users with this sort of problem.

OFTC doesn’t ever delete nickserv registrations.

Sigh to Freenode.